Measurement Capability
Parameter / Test | Range / Accuracy / Specifications |
---|---|
Insulation resistance | Test Voltage : 50 to 1000V (adjustable), IR Range:10MOhm,100MOhm,1000MOhm, Measuring Accuracy = ±0.3% + max. ±5 digit |
High Voltage test | AC: 16KV, DC: 40KV, Accuracy: ±2% |
Softening Temperature/Heat Deflection test | Temp.0-200 Deg. C, Dial Gauge Least Count 0.01mm, Chisel Radius 3mm ±0.1734 mm, Pin Dia. 1mm ±0.1734 mm, Accuracy: ±3% |
Heating Test | 30 Channel mobile recorder, TC:±0.15% of rdg. +1°C |
Active Flammability | Max voltage: 6KV ,Accuracy: ± 3 % |
Earth resistance | 0-120A, 12V |
Leakage Current | Leakage Current:0 -20.00mA, AC Voltage: 0.0-277.0V |
Conductor Resistance | Range: 3mΩ to 30KΩ, Accuracy: (±0.03% Rdg+0.02%FS) |
Insulation Thickness | 0-50mm, L.C.=0.001mm |
Torch Current | 0.0µA-999.9µA (at 0.0-277.0V),± (2% Rdg+3 Counts) |
Glow Wire Test | 0-960°C±10°C |
Tracking Index | 0-600V, 1.0A |
Torsion Test | Range :+/-10 to +/-60 Kgf.cm 1 Division :± 2% |
Mechanical Strength | Up to 200N, Accuracy: ±5% |
Creepage distances , Clearance and distance through insulation | 0-200mm, Accuracy: ±0.02mm |
Conductor Diameter | 0-25mm, Resolution: 0.001mm |
Power Input & Current | VAC/VDC : 1000Vmax, IAC/IDC : 200A, Power: 400KW, Accuracy:±(0.15% of Rdg+2 digit) |
Inter turn Test | Frequency 45-130 Hz, Voltage 0-650V |
Cord retention test | 5-50N |
Torque test cord anchorage | 0.4Nm to 5.0Nm |
Impact test | 0.2Nm to 1.0Nm |
% SPO2 | 35%-100% Accuracy: ±3% |
BPM | 30-250BPM, Accuracy: 1%±1 BPM |
Flow rate | Range: 0.1-180LPM Accuracy: ±2% of Rdg. |
Inspiration Time | 0.01-60 Sec |
Expiration time | 0.01-60 Sec |
Pressure | -20 to 350cmH2O |
Tidal Volume | 0 to 2200ml, Accuracy: ±2% of Rdg. |
Loss of Mass Test | 100g max., Accuracy: ±1% |
Capacitance | C=.01fF-1999mF, Accuracy: ±0.1% |
Tangent of loss angle | D=.00001-9.9999, Accuracy: ±0.1% |
Defibrillator Energy | 0-1000 Joules, Accuracy: ±2% rdg ±5 joules |
Insulation Resistance, Mains Part Applied Part | 0-50MΩ |
Protective Earth resistance | 0-5Ω |
Earth Leakage Current | 10µA-5000µA |
Thermal Stability | Temp.: 0-250°C |
Dimensions | 0-1000mm |
Bump Test | Height: 5 cm |
Ball Pressure test | Force: 20N, Ball diameter: 5mm |
Ionizing Radiation | 0-100mR/h, Accuracy:< ±10% of Full Scale Indication |
List of Major Facility
Facility / Equipment / Tools | Make and Model |
---|---|
Tracking index analyzer | PTL M3106 |
Flexing Apparatus for cable | Friborg 7100 |
Abrasion Test Apparatus | Friborg 7250 |
Bending Test Apparatus | Friborg 7250 |
Torque Meter | Tohnichi 2-OT |
Spring operated impact Test Apparatus | PTL F22.50 |
Profile Projector | Dynascan PT-20 |
Earth bond tester | Friborg |
Glow Wire Tester | Friborg GW1000/4 |
Hot wire ignition Tester | Friborg |
Digital Force Gauge | Chattilon DRC 200 N |
Exposure Rate Measuring System | Victoreen 440RF/D |
Ultrasonic thickness gauge | Imeco UTG-5201 |
Leakage current tester | Elabo 2G2790-21 |
High Precision Touch Current Tester | EXTECH 7630 |
Mobile Carder | Yokogawa MV230 |
Bump test apparatus | Friborg 5200 |
Double freq./Double voltage tester | Friborg 2500 |
Creepage & Clearance gauge Set | Idemi |
Vicat tester | Wallace P7E & WEST 2075 |
Cord anchorage strain device | PTL F47.35 |
Cord anchorage torque device | PTL F20.12 |
Digital Multi meter | Rishabh Rish multi 18S |
Insulation tester | Elabo 2GA27 90-4K |
HF Spark Tester | Edward HV, ST4M |
International Safety Analyzer | Bio Tek ISA 470B |
Defibrillator Analyzer | Bio-Tek QED 5 |
Pulse Oximeter Simulator | Fluke Biomedical 2XLFE |
Ventilator Tester | Metron QAVTM 16200 |
X,Y Capacitor tester | EMC Partner MIG1212CAP |
Flammability tester | EMC Partner MIG1803CAP |
HIPOT Analyser | Chroma 19055 |
Micro Ohm Meter | CROPICO DS5001 |
Major Products Tested / Project Done
Major Products Tested / Projects Done |
---|
Household Consumer Electronics include: Radio Receivers, TV Receivers, Musical Systems, VCD Players, VCRs, , Musical instruments, Video games etc.
IT equipments include: PCs, Telephone, PMU, Scanner, Repeater dual band, PMUs etc
Household electrical appliances include : Electric Irons, Desert Coolars, Washing Machines, Kitchen machines, JMGs, Thermal Mattress with controller, Hot Plates, Toasters,, Room Heaters, Can vending Machines, , Thermal Acupressure Device , Refrigerators, Fans etc.
Measuring & lab equipments include : Energy Meter, Spectrophotometers, Microscopes, Insulation Tester, Oscilloscopes, Digital Indicators, Free Cooling System etc.
Safety critical components include : PVC Insulated cables, CRTs, FBTs, Transformers, Mains Cord, Plug and sockets, Appliance couplers, Glass Cartridge Fuse links, Switches for appliances , RF Suppression Capacitors etc.
Luminaries include : Electronic Ballast, Conventional Ballast, Portable Lamps, Self Ballasted lamps , Aviation Obstruction light, Medium Intensity Light etc
Bio-medical Equipments include : ECG Machines, OT lights, Patient Monitors, RF Blood Sealer etc.
Machines include: Compression Testing Machine, Balancing Machine,Vibrating Machine, Multi Track Machine, Packaging Machine,Jolting Machine etc.
|